The Significance of Chemical Sampling Quill
Chemical Sampling Quill plays a crucial role in oil and gas operations. The production efficiency is improved and the equipment life is extended. In addition, it helps to prevent corrosion, reduce scaling, and control the emulsion of oil and water.
Chemical injection process overview
The chemical injection process involves a precise dosing system. Operators inject chemicals directly into oil Wells and pipelines. This approach guarantees optimal performance and protection of the infrastructure. In addition, these processes vary greatly depending on specific site requirements and operational challenges. Each approach focuses on maximizing recovery and minimizing operating costs.
Corrosion
Types and mechanisms of corrosion
Corrosion can take many forms, including electrical, pitting, and crevice corrosion. Each type stems from a different electrochemical or chemical reaction. These reactions degrade the metal and compromise the integrity of the pipe. Understanding these mechanisms can help in the selection of appropriate inhibitors.
The role of corrosion inhibitors in preventing corrosion
Corrosion inhibitors play a vital role in protecting metal surfaces. They form a barrier that minimizes the metal’s exposure to corrosive agents. By doing so, these inhibitors significantly extend the service life of oilfield equipment. This product guarantees continuity and safety of operation.
Selection Model
| Модель | ||||||||||||||||||||||||||||
| СИ | Игла для инжектора химикатов | |||||||||||||||||||||||||||
| -Code | Затычка | |||||||||||||||||||||||||||
| Пх | Тип | Материал | Sealing Материал | |||||||||||||||||||||||||
| 0 | Нет запроса | 0 | КС | 0 | Нет запроса | |||||||||||||||||||||||
| 1 | Hollow Plug Body | 1 | 316SS | 3 | СХД | 1 | Уплотнительное кольцо из витона / первичная набивка из ПТФЭ | |||||||||||||||||||||
| 2 | Прочный корпус вилки | 2 | 316ЛСС | 4 | ИНКОНЕЛЬ | 2 | HNBR | |||||||||||||||||||||
| – Code | Инжекторная гайка | |||||||||||||||||||||||||||
| Нхх | Размер соединения | Материал | ||||||||||||||||||||||||||
| 0 | т.е. нет запроса | 0 | i.e. CS | |||||||||||||||||||||||||
| 1 | i.e. 1/4″ | 1 | т.е. 316SS | 3 | т.е. DSS | |||||||||||||||||||||||
| 2 | i.e. 1/2″ | 2 | т.е. 316LSS | 4 | т.е. ИНКОНЕЛЬ | |||||||||||||||||||||||
| – Code | Injection Тюбик | |||||||||||||||||||||||||||
| Sxxx-Lx″ | Размер соединения | Материал | Сопло | Line size(x″) | ||||||||||||||||||||||||
| 0 | Нет запроса | 0 | КС | 0 | т.е. нет запроса | Наиболее эффективное положение для впрыска обычно находится в центре трубы | ||||||||||||||||||||||
| 1 | i.e. 1/4″ | 1 | т.е. 316SS | 1 | т.е. открытый | |||||||||||||||||||||||
| 2 | i.e. 1/2″ | 2 | т.е. 316LSS | 2 | т.е. перо | |||||||||||||||||||||||
| 3 | т.е. DSS | 3 | i.e. Cap & Core | |||||||||||||||||||||||||
| 4 | т.е. ИНКОНЕЛЬ | |||||||||||||||||||||||||||
| – Code | Nipple and Valve（or end Flange）of Tee | |||||||||||||||||||||||||||
| Тхх | Размер соединения | Материал | ||||||||||||||||||||||||||
| 0 | т.е. нет запроса | 0 | i.e. CS | |||||||||||||||||||||||||
| 1 | i.e. 1/4″Nipple | a | i.e. 1/4″Nipple and Valve | 1 | т.е. 316SS | |||||||||||||||||||||||
| 2 | i.e. 1/2″Nipple | b | i.e. 1/2″Nipple and Valve | 2 | т.е. 316LSS | |||||||||||||||||||||||
| 3 | i.e. 3/4″Nipple | c | i.e. 3/4″Nipple and Valve | 3 | т.е. Д СС | |||||||||||||||||||||||
| 4 | i.e. 1″Nipple | d | i.e. 1″Nipple and Valve | 4 | т.е. ИНКОНЕЛЬ | |||||||||||||||||||||||
| 5 | i.e. 1/4″Flange | e | i.e. 1/4″Nipple end Flange | |||||||||||||||||||||||||
| 6 | i.e. 1/2″Flange | f | i.e. 1/2″Nipple end Flange | |||||||||||||||||||||||||
| 7 | i.e. 3/4″Flange | g | i.e. 3/4″Nipple end Flange | |||||||||||||||||||||||||
| 8 | i.e. 1″Flange | h | i.e. 1″Nipple end Flange | |||||||||||||||||||||||||
| For Example, SI-P221-N12-S122-L4″-T22 | ||||||||||||||||||||||||||||
| SI：e.g. Sampling & Injection Assembly， | ||||||||||||||||||||||||||||
| P221: e.g. Solid Plug Body in 316LSS Viton O-Ring and PTFE Primary Packing， | ||||||||||||||||||||||||||||
| N12：e.g. injection Nut Connection Size is 1/4″and Материал 316LSS， | ||||||||||||||||||||||||||||
| S122：e.g. injection Тюбик Connection Size is 1/4″ and Материал 316ЛСС. Тип насадки – иглы | ||||||||||||||||||||||||||||
| L4″：For 4″pipe. | ||||||||||||||||||||||||||||
| Т22: Сосок of Tee Connection Size is 1/2″, Материал ниппеля 316ЛСС | ||||||||||||||||||||||||||||
Specifications of Chemical Sampling Quill
| Имя | Pipeline Chemical Injection Quill Sampling System |
| Материал | Stainless Steel 304、Stainless Steel 316、DSS F51、Carbon Steel A105N、Inconel 625 |
| Рабочая температура | -20±120 |
| Особенность | 1. Easy Operating |
| 2. High Accuracy Long Life | |
| 3. High Efficiency, Low cost | |
| Уплата | ТТ/ЛК |
| Преимущество | Во-первых, они легкие и гибкие. |
| Secondly, nice Injection efficiency. | |
| Наконец, точное отслеживание местоположения. |
Заключение
Chemical Sampling Quills, also known as sample or injection quills, are usually made of alloys such as 316/316L stainless steel. Materials used to make quills include rods, ASME pipes, flanges, and fittings. The manufacture of feather pipe assemblies includes valves and other process pipe assemblies. If you have any needs, feel free to contact us. We will provide the best price for you.
Отзывов пока нет.