EMT Retractable Injection Quill is a specialized device engineered by Shenyang EMT Piping Technology Co., Ltd., designed to facilitate the accurate and controlled injection of chemical inhibitors directly into pipelines. This is essential for minimizing corrosion, a common challenge in the oil, gas, and chemical industries. The retractable design of the quill ensures it can be inserted or removed from the pipeline without needing to shut down the system, thereby enhancing operational efficiency and safety.
1. Order Information
Access Fitting Body
| مدل | ||||||
| EMT-CIPA | Access Fitting Body of Coupon, Injector, Probe assembly | |||||
| - مواد بدنه اتصالات دسترسی | ||||||
| 0 | حسابهای | |||||
| 1 | 316 اس اس | |||||
| 2 | 316 ال اس اس | |||||
| 3 | دوبلکس SS | |||||
| نوع بدنه اتصالات دسترسی | ||||||
| B | 2 "جوش داده شده (پسوند "درجه فشار" را می توان به B اضافه کرد) | |||||
| F | 2″ANSI Flange（suffix “pressure rating & sealing type” can be added to F） | |||||
| -Tee Size- pressure rating & sealing type if flanged end | ||||||
| 0 | بدون سه راهی | |||||
| 1 | سه راهی 1/4 اینچی NPT (F) | |||||
| 2 | سه راهی 1/2 اینچ NPT (F) | |||||
| 3 | سه راهی 3/4 اینچی NPT (F) | |||||
| 4 | سه راهی 1 اینچی NPT (F) | |||||
| 5 | سوراخ برای فلنج 1/4 اینچ SWN | |||||
| 6 | سوراخ برای فلنج SWN 1/2 اینچی | |||||
| 7 | سوراخ برای فلنج 3/4 اینچی SWN | |||||
| 8 | سوراخ برای فلنج 1 اینچی SWN | |||||
| -نوع پوشش محافظ / مواد | ||||||
| 0 | بدون پوشش محافظ | مواد | ||||
| 1 | بدون سوراخ | CS یا 0 | ||||
| 2 | با سوراخ | SS یا 1 | ||||
| 3 | شیر خونریزی | DSS یا 3 | ||||
| 4 | Bleed Valve, & Pressure Gauge | |||||
| For Example：EMT-CIPA-0F600#RF-2-1/CS shows 2″ANSI 600#RF Flange Access Fitting Body in CS, 1/2″NPT(F)Tee, Protective Cover in CS without hole
0F600#RF: 0F_ Access Fitting Body is Flanged in CS , 600#RF _Size is 2″ANSI 600#RF , 2: اندازه سه راهی 1/2NPT (F) است 1: Protective cover type is without hole /CS: Protective cove material in CS |
||||||
Sampler & Injector
| مدل | |||||||||||||||||||||||||
| Si | Sampler & Injector | ||||||||||||||||||||||||
| -کد | پلاگین | ||||||||||||||||||||||||
| Pxxx | نوع | مواد | مهر مواد | ||||||||||||||||||||||
| 0 | بدون درخواست | 0 | حسابهای | 0 | بدون درخواست | ||||||||||||||||||||
| 1 | توخالی بدنه پلاگین | 1 | 316 اس اس | 3 | Dss | 1 | بسته بندی اولیه Viton O-Ring / PTFE | ||||||||||||||||||
| 2 | بدنه پلاگین جامد | 2 | 316 ال اس اس | 4 | Inconel | 2 | HNBR | ||||||||||||||||||
| –کد | مهره تزریق | ||||||||||||||||||||||||
| Nxx | اندازه اتصال | مواد | |||||||||||||||||||||||
| 0 | بدون درخواست | 0 | حسابهای | ||||||||||||||||||||||
| 1 | 1/4″ | 1 | 316 اس اس | 3 | Dss | ||||||||||||||||||||
| 2 | 1/2″ | 2 | 316 ال اس اس | 4 | Inconel | ||||||||||||||||||||
| –کد | Sampling & Injection لوله | ||||||||||||||||||||||||
| Sxxx-Lx" | اندازه اتصال | مواد | نازل | اندازه خط (x") | |||||||||||||||||||||
| 0 | بدون درخواست | 0 | حسابهای | 0 | بدون درخواست | موثرترین موقعیت برای تزریق به طور کلی در مرکز لوله است | |||||||||||||||||||
| 1 | 1/4″ | 1 | 316 اس اس | 1 | Open | ||||||||||||||||||||
| 2 | 1/2″ | 2 | 316 ال اس اس | 2 | Quill | ||||||||||||||||||||
| 3 | Dss | 3 | Cap & Core | ||||||||||||||||||||||
| 4 | Inconel | ||||||||||||||||||||||||
| –کد | Type and Size of components connected to Tee and material of components | ||||||||||||||||||||||||
| Txx | اندازه اتصال | مواد | |||||||||||||||||||||||
| 0 | بدون درخواست | 0 | حسابهای | ||||||||||||||||||||||
| 1 | 1/4″Nipple | a | 1/4″Nipple and Valve | 1 | 316 اس اس | ||||||||||||||||||||
| 2 | 1/2″Nipple | b | 1/2″Nipple and Valve | 2 | 316 ال اس اس | ||||||||||||||||||||
| 3 | 3/4″Nipple | c | 3/4″Nipple and Valve | 3 | D SS | ||||||||||||||||||||
| 4 | 1″Nipple | d | 1″Nipple and Valve | 4 | Inconel | ||||||||||||||||||||
| 5 | 1/4″SWN Flange* | e | 1/4″Nipple and Flange | ||||||||||||||||||||||
| 6 | 1/2″SWN Flange | f | 1/2″Nipple and Flange | ||||||||||||||||||||||
| 7 | 3/4″SWN Flange | g | 3/4″Nipple and Flange | ||||||||||||||||||||||
| 8 | 1″SWN Flange | h | 1″Nipple and Flange | ||||||||||||||||||||||
| For Example：SI-P221-N12-S122-L4″-T22 SI：Sampling & Injection Assembly，P221: Solid Plug Body in 316LSS Viton O-Ring and PTFE Primary Packing，N12：Injection Nut Connection Size is 1/4″and مواد است 316LSS，S122：Injection لوله اندازه اتصال 1/4 اینچ است و مواد است 316LSS.Type of nozzle is quill，L4″：For 4″pipe. T22: Connection Size of Nipple connected to Tee is 1/2″NPT(M), مواد نوک پستان است 316 ال اس اس | |||||||||||||||||||||||||
Note: SWN Flange is special WN Flange
Example for a set of Sampler & Injector Assembly:
EMT-CIPA-0F600#RF-2-1+ SI-P221-N12-S122-L4″-T22
2. Design and Construction of Retractable Injection Quill
Constructed for durability and precision, the quill includes various nozzle options, allowing customization based on the specific chemical injection requirements of different systems. The robust internal assembly features a solid plug body, an injection nut, and an injection tube, all crafted to ensure reliable and effective performance under varying operational conditions.
3. Integration and Compatibility
Connection to the pipeline system is streamlined and secure, with components such as an NPT nipple, a manual valve, and an SWN flange facilitating easy integration into existing infrastructure. The versatile process connection options, including 2″ flanges, 2″ Flareweld access fittings, and 1″ Nipple to NPT ball valves, allow the quill to be adapted to a wide range of pipeline sizes and configurations.
4. Operational Parameters
هنوز هیچ بررسی وجود ندارد.